Gas phase filter 12/12 mm (sedimentation) - ALEX - ULTRA 360

ALEX volatile phase filter - Ultra 360 12x12 - ALEX volatile phase filter used in car gas installations of the 4th generation.

ALEX - Ultra 360 12x12 vapor phase filter - used in the low-pressure part of the 4th generation automotive gas installations (sequential gas injections in the vapor phase), in which LPG is in the vapor phase.

ALEX - Ultra 360 12x12 volatile phase filter - a filter mounted between the reducer, evaporator and the LPG injector rail protects it against impurities that may appear in LPG.

The ALEX volatile phase filter - Ultra 360 12x12 - provides excellent filtration thanks to the original design of the filter unit, in which the gas introduced into the filter is rotated and directed down the filter body. The centrifugal force acting on the particles in the volatile phase causes them to be centrifuged and retained at the bottom. Returning upwards, the gas stream passes through the filter cartridge, which cleans it of remaining, fine impurities.

Replaceable cartridges can be found in our store under the code 32.LPG.935.

In the ALEX - Ultra 360 12x12 volatile phase filter, the inlet and outlet stubs are located on separate, independent elements of the housing, which allows for any adjustment of the angle between them, which facilitates its installation in the engine compartment.

The ALEX - Ultra 360 12x12 gaseous phase filter has one gas input and one gas output, which means that it is most often found in cars equipped with four-cylinder engines.

Air phase filter ALEX - Ultra 360 12x12 :

• housing material - polyamide-glass composite,
• dimensions - 60mm x 60mm x 106mm.
• filter material - polyester,
• working temperature - from -20 to 120°C,
• classification pressure - 4.5 bar,
• gas inlet and outlet pipe diameters - 12mm (currently the most popular diameter among Polish manufacturers of gas installations),
• recommended replacement - every 10-15 thousand. km or as required by the manufacturer.