Hose clamp ABA NOVA 25 15-24/9 W1

Band 15-24 mm ABA - high quality worm band, clamp for hoses, rubber conduits.

Clamp 15-24 mm ABA - special design of the clamp (worm clamp) ensures even distribution of high clamping force around the circumference and obtaining adequate tightness of the connection while minimizing the risk of damage to the hose. The specially designed worm housing ensures safe guiding of the extending end of the clamp, and its short length ensures optimal pressure on the hose.

The Aluzink S20 material from which the tape is made provides three times better corrosion resistance than galvanized steel, which results in long-term operation of the clamp (clamp).

15-24 mm ABA clamp - most often used for water hoses with a nominal diameter of 15-16 mm supplying to the reducer, evaporator, through the engine cooling liquid, the heat necessary for the effective change of state of LPG from the liquid phase to the gaseous phase and to gas hoses with a nominal diameter of 16-17 mm, which work in the low-pressure part of automotive gas installations in which LPG is in the volatile phase. These hoses connect the reducer, evaporator (through the vapor phase filter and pressure sensor) with the vapor phase gas injector rail, which doses LPG to the engine's inlet channels.

15-24mm ABA Band :

• size - 15-24,
• minimum diameter - 15 mm,
• maximum diameter - 24 mm,
• tape width - 9 mm,
• tape thickness - 0.8 mm,
• spanner size - 7,
• recommended tightening torque - 2.5 - 3.5 Nm,
• screw - electrolytically galvanized,
• tape - aluzinc.