Multivalve BRC europa2 200/30 tor without filler

Multivalve for the internal toroidal tank model Europa2, BRC brand of the Italian company MTM srl, Westport Fuel Systems Group, WFSI srl.

Multi-function valve, accessories for the internal LPG gas tank, mounted inside the vehicle in the trunk in the spare wheel recess with a height of 200 millimeters. It fulfills several important functions related to the safety and use of the gas system in the vehicle. He is responsible, among other things, for filling the tank with the right amount of gas, up to 80% of the tank's water capacity, transmitting a signal about the tank's filling level, protection against excessive pressure increase in the tank, protection against a sudden gas outflow caused by damage to the gas pipe between the tank and the engine compartment, shutting off gas outflow from the tank when the engine is turned off.

Multivalve, size 200/30ᵒ, with a socket for a copper supply cable with a nominal diameter of 8 millimeters with an external thread G1/8 ", and a socket for an output cable to the engine compartment with a nominal diameter of 6 millimeters with an internal thread M10x1 millimeter.

Complete with a gas level sensor, connected using a two-pin superseal connector, and an assembly bag containing:
- 6 multi-valve mounting bolts,
- a barrel for a power cord with a diameter of 8 millimeters,
- a clamping nut with a G1/8" thread for a barrel with a diameter of 8 millimeters,
- a barrel for the output wire with a diameter of 6 millimeters,
- a pressure screw with a thread M10x1 millimeter for a barrel with a diameter of 6 millimeters and
- solenoid valve coil, components of the safety valve vent and multi-valve float,

- a magnet for collecting metallic filings in the LPG tank.
Attention:
There is no gas filler in the set.