| Type of injector | VALTEK TYP 30 |
|---|---|
| Number of injectors: | 2 |
| product code: | 70.TOM.709 |
|---|---|
| manufacturer: | VALTEK |
| category: | Injectors and accessories VALTEK |
| manufacturer code: | MVAT0A08.1 |
| approval number: | E8-67R-013018 |
Two-cylinder injection rail with a metal body, Type 30 from the Italian company Valtek.
The rail is designed for fourth generation sequential gas injection systems in the volatile phase, installed in cars with four, five or six-cylinder engines.
VALTEK injector rail - 2 cylinders, coil resistance 3Ω, two-pin superseal injector sockets, gas inlet connector with an outer diameter of 10.4 millimeters, one end cap for the connector of the rail body with an O-ring, two metal-rubber cushions for mounting the rail with M5 thread, two brass ones calibration nozzles (18.VAL.905), two nozzles for the intake manifold for an Allen key with an M6 thread with an outer diameter of 5.5 millimeters.
RAIL TYPE 30
E4-67R-010104
E4-110R-000040
| Type of injector | VALTEK TYP 30 |
|---|---|
| Number of injectors: | 2 |
| 1 | x | Injector rail VALTEK type 30 2 cylinders 3 Ohm |
| 2 | x | RAIL/VALTEK CALIBRATION NOZZLE 1.5 fi5.5 |