Filter type: | with a replaceable cartridge |
---|---|
Filter model: | F-779/B KME |
Cartridge: | fiberglass |
Input: | 12 mm |
Output: | 12 mm |
Cover: | metal |
Type of assembly: | on hose |
product code: | 52.MAG.905 |
---|---|
manufacturer: | KME |
category: | Filters KME |
manufacturer code: | 1300 |
approval number: | E20-67R-010896 |
Some injectors require a better quality of LPG filtration than that obtained using filters with paper inserts (filter paper). For this reason, manufacturers also use other filter materials. In the case of the KME 32.CRT.972 volatile phase filter, it is glass fibre.
The filter was developed by KME and Certools. It is a filter mounted on the gas pipe without the need for additional holders and brackets. The replaceable filter cartridge allows you to use the same filter housing many times, which is a measurable financial benefit for the user and less burden on the environment.
The manufacturer has prepared three versions of the KME 32.CRT.972 volatile phase filter, depending on the diameter of the connectors and their number.
The KME 32.CRT.972 volatile phase filter cartridge is replaced every 15-20 thousand. km depending on the requirements of the manufacturer of the installation and the quality of LPG.
The filter should be installed on hoses with a diameter corresponding to the diameter of the connectors.
Installation of the KME 32.CRT.972 volatile phase filter and replacement of the filter element as well as all related repairs should be carried out in specialized workshops.
Volatile phase filter with a replaceable cartridge, dedicated to sequential installations (4th generation). It is designed to prevent oily fractions precipitating during LPG evaporation and other impurities that may contain gas fuel from the reducer to the injectors. The filter is packaged in KME LPG installations
Aluminum filter with replaceable fiberglass cartridge, seeger ring pliers required to replace the cartridge. Gas inlet connector with a diameter of 12 millimeters, gas outlet connector with a diameter of 12 millimeters, fiberglass filter cartridge, gas flow direction specified on the casing. Qualifying pressure 450 kPa, recommended operating temperature range from -40ᵒC to +120ᵒC. E20-67R-010663 E20-110R-000031 The filter insert comes in the form of a set with o-rings, code: 20.CRT.902
Filter type: | with a replaceable cartridge |
---|---|
Filter model: | F-779/B KME |
Cartridge: | fiberglass |
Input: | 12 mm |
Output: | 12 mm |
Cover: | metal |
Type of assembly: | on hose |
Product compliance details: » Person responsible for the product » Security, compliance and warnings