ECU - EG Avance ECU UNI 32.4 controller

The control unit - EG 32.4 Avance ECU UNI controller is an innovative device that was created for cars powered by LPG gas. This product comes from a reputable manufacturer EUROPEGAS , which guarantees its high quality and reliability. The manufacturer's product code is EU30400000001A10001 and the approval number is E8 67R01 4709.

The EG 32.4 Avance ECU UNI controller is a modern device that was created on the basis of a new, improved hardware platform. This ensures that all commands are handled without buffer delays and processing times are measured in hundredths of a second. Reducing the size of the ECU allows it to fit into a small housing with a single 32-pin automotive Molex connector.

The EG 32.4 Avance ECU UNI controller has many functions that facilitate the diagnosis of the system operation. The configuration allows you to connect one LAMBDA probe to the controller and establish communication with the vehicle's OBD. This makes it quick and easy to check that the system is working properly. In addition, the controller has the function of petrol injection during operation on gas, which protects the engine when driving under heavy load.

The control unit - EG 32.4 Avance ECU UNI controller is designed for cars powered by LPG gas. This product is an ideal solution for people who want to reduce the operating costs of their vehicle. By using this controller, you can save up to 50% of fuel costs compared to traditional petrol engines.

The EG 32.4 Avance ECU UNI controller is compatible with engines with indirect injection and 4-cylinder engines. Thanks to this, it can be used in many different car models.

Technical data

• Automatic software updates

• Installation inspection reminder

• Supports Bluetooth and WiFi connection

• Active Diagram Mode - interactive

calibration mode

• Push-button automatic tuning

switch without disconnecting the PC

• Multiplier auto-adaptation

• Calibration assistant

• Sound signaling of work errors

• Continuous map collection

• No cable connection required

engine speed

• Petrol injection function

• Possibility to set ECU lock after expiration

specified time of use

• Fuel pump shutdown control

as a function of time

• Load test (road dynamometer, measurement

power and torque)

• Programming change of injectors order

• Oscilloscope of petrol and gas injection signals

Start system support