Type of injector | ACW 03 |
---|
product code: | 70.TOM.719 |
---|---|
manufacturer: | AC STAG |
category: | Injectors and accessories AC STAG |
manufacturer code: | NGK97999 |
approval number: | E8-67R-013018 |
AC W03 injectors from AC Białystok in the set for a four-cylinder engine.
Installation kit with single gas injectors AC W03 from AC Białystok, designed for the installation of sequential gas injection in the volatile phase used in four-cylinder engines. Most often found in STAG brand installations.
The set includes: four W03 single injectors (E8-67R-017296, E8-110R-007297), four bags of injector accessories (connector and gas inlet elbow with o-ring and clip, two injector calibration nozzles, nozzle for the intake manifold, cable ties four-cylinder plastic dividing strip W03-4 (E8-67R-017296, E8-110R-007297), a bag with accessories for the manifold (a plug with an O-ring and a clip, a gas inlet connector with an outer diameter of 12 millimeters, one band for a thick gas pipe and four clips for gas supply pipes to the injectors), connection and operating instructions.
Type of injector | ACW 03 |
---|
4 | x | HOP 7-11 5m wormdrive clamp |
4 | x | Oring AC 5x1.5 fkm-70 (16) |
8 | x | Oring AC 7x1.6 fkm-70 (15) |
2 | x | Oring AC 9.5x1.8 fkm-70 (14) |
1 | x | Zalepka m12 acw02 (4) |
2 | x | acw02 bar cotter pin (5) |
4 | x | Straight cotter pin acw03 (10) |
4 | x | elbow acw03 (6) |
4 | x | Outlet connector for acw03 strip (7) |
4 | x | acw02;03 injector calibration nozzle |
4 | x | Nozzle W manifiold m6 fi6 length 28mm (acw03) |
1 | x | AC STAG ACW03 4 sections manifold (only plastic) |
1 | x | HOP 12-22 8m hose clamp |
1 | x | OUTLET CONNECTOR FOR ACW02 M12 RAIL (3) plastic |
+ | 4 | additional products |