Type of injector | ACW 03 |
---|
product code: | 32.CRT.904 |
---|---|
manufacturer: | AC STAG |
category: | Injectors and accessories AC STAG |
manufacturer code: | NGK97999 |
approval number: | E20-67R-010527 |
A set of injectors for single installation type AC W03-3 from AC Białystok.
The kit is designed for AC Bialystok gas injection systems in the volatile phase, mounted on cars with three, five or six-cylinder engines.
Single AC W03 injectors - 3 pieces (1.9 Ω, E8 67R 017296, E8 110R 00 7297),
injector tee for a rubber hose with an outer diameter of 11.9 millimeters - 2 pcs. ( 16.ACE.272 ), sealing o-rings of the gas inlet to the injector - 4 pcs. ( 10.ACE.104 ), gas inlet elbow to the injector - 1 pcs. ( 17.ACE.914 ), gas inlet tee to the injector with a socket for the pressure sensor PS-04 - 1 pc. ( 17.ACE.915 ), gas outlet connector (calibration nozzle) with an outer diameter of 6 millimeters - 3 pcs. ( 18.ACE.906 ), sealing O-rings for calibration nozzles - 3 pcs. ( 10.ACE.103 ), clips for tees and gas inlet elbows to the injector - 3 pcs. ( 11.ACE.927 ), clip for pressure sensor - 1 pcs. ( 11.ACE.926 ), manifold nozzle with an outer diameter of 5 millimeters for M6 thread ( 18.ACE.907 ) - 3 pcs., connection and operating instructions.
Working pressure: 0.95-1.2 bar,
Maximum working pressure: 4.5 bar,
Operating temperature: -20 to +120ᵒC
Injector opening time at 1.2 bar pressure: 2.0 ms,
Injector closing time at 1.2 bar pressure: 1.0 ms,
Capacity range: 11-31 kW/cylinder,
Weight: 88g,
Coil resistance: 1.9Ω +/- 0.1,
Maximum flow at 1.2 bar: 120 l/min.
E8-67R-017296
Type of injector | ACW 03 |
---|
3 | x | Oring AC 5x1.5 fkm-70 (16) |
4 | x | Oring AC 7x1.6 fkm-70 (15) |
1 | x | acw02 bar cotter pin (5) |
3 | x | Straight cotter pin acw03 (10) |
2 | x | T-adapter 12 acw03 (11) |
1 | x | Elbow 12 acw03 (12) |
1 | x | Elbow PS acw03 (13) |
3 | x | acw02;03 injector calibration nozzle |
3 | x | Nozzle W manifiold m6 fi6 length 28mm (acw03) |
3 | x | ACW.03 injector 1cyl. single |