Injection rail acw BFC 3 cylinders with confection

Injection rail AC W01-3 BFC 3 cylinders with assembly - three-cylinder injection rail ACW 01-03 BFC by AC SA from Bialystok

Injection rail AC W01-3 BFC 3 cylinders with assembly - injection rail used in the low-pressure part of 4th generation car gas installations (sequential gas injections in the vapor phase), in which LPG is in the vapor phase. It doses gaseous fuel to the intake ducts of individual cylinders in engines adapted to run on LPG. Usually used in STAG gas installations by AC SA in 6-cylinder engines.

The AC W01-3 BFC 3-cylinder injection rail set includes:

• injector rail AC W01-03 (2 Ohm) - 1 set,
• connector for the strip - fi 10.5 mm - 1 pc.,
• gas outlet connector (calibration nozzle fi 4.5 mm) with sealing O-ring - 3 pcs.,
• T-shaped perforated handle - 1 piece,
• nozzle for the collector (connector fi 4.5 mm, hole fi 3.3 mm, thread M6) - 3 pcs.,
• metal-rubber cushions - 2 pcs,
• M4 nut - 2 pcs.,
• plain washer M4 - 2 pcs.,
• spring washer M4 - 4 pcs.

Parameters of the AC W01-3 BFC injection rail :

• working pressure - 0.95-1.2 bar,
• maximum working pressure - 4.5 bar,
• operating temperature - from -20 to 120 degrees C
• injector opening time at 1 bar < 2.4 ms,
• injector closing time at 1 bar pressure - 1.7 ms,
• capacity range - 15-40 kW/cylinder,
• weight - 0.48 kg,
• coil resistance - 2 ohms,
• maximum flow at 1 bar pressure - 120 l/min,
• homologation for LPG - E20 67R 010973,
• homologation for CNG - E20 110R 00 0044.

Dimensions:

• L - 61mm,
• D - 122mm.